Electro-Voice RE3-RE520 Single Handheld Wireless Mic Set, Band 5L

Full Description

Find your voice

Vivid, full, and detailed. The Electro-Voice RE3-HHT520 Handheld Wireless Transmitter is the ultimate wireless microphone for your EV wireless system. With its premium RE520-RC3 condenser microphone head, you can take advantage of a sound signature with outstanding clarity and presence. The supercardioid polar pattern provides exceptional isolation and feedback control, whilst a switchable HPF lets you eliminate unwanted LF content in an instant.

The transmitter itself boasts a rugged all-metal body and is powered by two AA (alkaline or rechargeable NiMH) batteries. Syncing the transmitter with your receiver is quick and easy thanks to an intuitive ultrasonic sync function. With a wide selection of frequency tuning options, you can avoid a diverse range of potential interference sources. And with a commonly-used coupling convention, adapting your favourite microphone heads for use with the transmitter is a breeze.

Simple set-up

The RE3 receiver gives you true plug-and-play usability. Frequency scan and sync functions cut down on lengthy set-up times. Meaning you're ready to go in an instant. While a radio-link between transmitter and receiver ensures clear audio and reliable performance. Every single time.

What's in the box?

• RE520-RC3 Wireless Head with RE520 Capsule
• RE3-HHT Handheld Transmitter
• RE3-RX Diversity Receiver

Features

• Frequency scanning lets you ensure there are free frequencies
• Sync function lets you connect transmitter and receiver in seconds
• Shock mounted capsule greatly reduces handling noise during performance
• Excellent speech intelligibility thanks to the large diaphragm
• Robust construction throughout with metal bodies and dent resistant grille

Specifications

RE3-RX RE3 receiver

• Frequency oscillation mode: Phase-locked loop (PLL)
• Sync frequency: Ultrasonic 40 kHz
• Diversity: Antenna diversity
• Bandwidth: 36MHz
• Signal/Noise ratio: >100dB(A)
• Total harmonic distortion (THD): <0.6-percent at 1kHz
• Receiving sensitivity: -81dBm for -12dB SINAD
• Frequency response:
  • 63Hz to 16kHz±2dB (BPT)
  • 51Hz to 16kHz±2dB (HHT)
• Antenna type: Detachable ½ wave with BNC connector
• Antenna booster power: DC12 - 15V/100mA
• Function display by: LCD
• Control functions: Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset.
• Sync data options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch)
• Audio frequency output impedance:
  • 240 Ohms (unbalanced)
  • 1400 Ohms (balanced)
• Squelch and noise muting: Noise muting and tone code locking
• Output ports: 1 x balanced XLRM jack, 1 x unbalanced ¼'' TS (6.3mm) jack
• Power supply: DC12 15V/500mA
• Finish: Black polyurethane paint
• Dimensions: 47 mm x 210 mm x 175 mm
• Net weight: 1.23 kg
• Gross weight: 1.49 kg

RE3-HHT RE3 handheld transmitter

• Frequency oscillation mode: Phase-locked loop (PLL)
• Sync frequency: Ultrasonic
• RF power output: 10mW and 50mW (Low and High)
• Display by: LCD + LED
• Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, RF power, auto off, key lock.
• RF stability: <±10kHz at Fc
• Modulation frequency shift: Wideband FM ±48kHz deviation
• Harmonic radiation: <-50dBc
• Battery: 2 x AA alkaline battery or NiMH rechargeable battery
• Charging contacts: Yes
• Microphone coupling: 1.25'' diameter, 28 UN-2A thread pitch
• Microphone electrical contact: 3-ring/3-pin
• Finish: Black polyurethane paint
• Height: 191mm
• Width at threaded end: 37mm
• Width at control cover: 22mm
• Net weight (without head): 346 g
• Gross weight (without head): 480 g

RE520-RC3 Wireless Head with RE520 Capsule

• Element Type: Self-biased condenser
• Frequency Response: 40 Hz to 20 kHz
• Polar Pattern: Supercardioid
• Sensitivity, open circuit voltage at 1 kHz: 5.6 mV/Pascal (-45 dBV/Pa)
• Clipping (max SPL): 139 dB SPL (1-percent THD)
• Self Noise: 22 dB SPL "A" weighted (0 dB=20 µPa)
• Dynamic Range: 117 dB
• Signal-to-Noise Ratio: 72 dB
• Output Impedance: 1000 Ohms
• Power Requirements: 4-8 VDC phantom power
• Polarity: Positive pressure on diaphragm produces positive voltage at centre contact relative to ground contact
• Electrical Contact: 3-Ring/3-Pin
• Threaded Coupling: 1.25'' diameter, 28 UN-2A thread pitch
• Finish: Black polyurethane paint
• Materials: Aluminium, steel, steel wire grille screen
• Dimensions: 85.3 mm x 49.6 mm
• Weight: 130 g