Full Description
View Full Description
Top class performance
No matter where you play, from underground clubs to the main stage - the DJ mixer is your key to keeping the crowd moving. The 24-bit two-channel mixer fuses incredible hardware with the effortless Serato Pro software. Giving you amazing sound quality, top-notch features, and great software based effects. The tough construction means the Scratch Mixer is ready for the tour. And with superb features like the InnoFADER crossfader, you'll be thankful it can withstand the toughest schedules.
There are performance pads - eight in total, an instant loop encoder, and toggle paddles for effects. It's easy to use, sounds great, and best all, helps you keep the party going.
Next-gen software
Through the included Serato Pro license you get all the amazing software features that help you express yourself through your decks. The simplicity of the software means you can concentrate on what matters most - mixing.
There are six buttons that allow you to control a comprehensive array of effects, each with editable parameters. The toggle paddles allow you to quickly apply effects before drops or other parts of the song. Allowing for total expression from behind the decks.
Looping made easy
Simply push the instant loop encoder down and you can easily loop sections of your song. These are set to your default parameters in your software. Just turn the knob to the right and keep the beat longer, or turn it to the left to tighten it up and shorten the length. This is really handy for mixing as you can keep a section going whilst you mix in the new song, and vice versa.
Ready for your setup
Even if you already have loads of gear in your performance setup, the Scratch Mixer features all the connections you need. Meaning you can quickly plug in your current gear. Your Scratch Mixer fits in with your gear incredibly easy. Acting as a great centre point and interface between your turntables, CDJ units, and laptop.
Features
- Serato DJ Pro with DVS Licence Included
- Ready to connect to Serato NoiseMap™ Control
- Vinyl or CDs (available separately)
- InnoFADER scratch crossfader with reverse and
slope control
- (6) direct access effect selectors with dual paddle
launch triggers and Dry/Wet FX Control
- (8) performance pads to access hot cues, rolls and
samples
- Filter knobs to create audio sweeps
- Dedicated instant looping knobs
Separate booth/zone output
- Prime Loop Sound Pack included ( 200 value)
- SoundSwitch lighting control software 2-month
subscription included
Specifications
- Master Outputs (balanced XLR):
- Frequency Response: 20Hz – 20kHz (+0.2dB)
- Signal-to-Noise Ratio: 108dB (A-weighted, max output)
- THD+N: 0.007 (1kHz, -1dBFS)
- Maximum Output Level: +20dBu
- Output Impedance: 300Ω
- Master and Booth Outputs (RCA):
- Frequency Response: 20Hz – 20kHz (+0.2dB)
- Signal-to-Noise Ratio: 107dB (A-weighted, max output)
- THD+N: 0.005 (1kHz, -1dBFS)
- Maximum Output Level: +6dBV (2Vrms)
- Output Impedance: 300Ω
- Headphone Outputs (¼” and 1⁄8” TRS):
-
Frequency Response: 20Hz – 20kHz (+0.2dB)
- Signal-to-Noise Ratio: 108dB (A-weighted, max output, unloaded)
- THD+N: 0.005 (1kHz, 10mW per channel into 32)
- Maximum Output Level: +14dBu (unloaded)
- Power Output: 115mW RMS (per channel into 32Ω)
- Output Impedance: 32Ω
Line Inputs (RCA):
- Frequency Response: 20Hz – 20kHz (+0.3dB)
- Signal-to-Noise Ratio: 102dB (A-weighted, max input level)
- THD+N: 0.008 (1kHz, +6.8dBV, -1dBFS)
- Max Input Level: +7.8dBV (2.45Vrms)
- Input Impedance: 47kΩ
- Phono Inputs (RCA):
- Frequency Response: RIAA Curve
- Signal-to-Noise Ratio: 99dB (A-weighted, max input level)
- THD+N: 0.01 (1kHz, -3dB input)
- Other Specifications:
- USB: USB 2.0 High-Speed
- ADC / DAC: 24-bit, 48kHz
- DSP: 32-bit fixed point
- Drivers: PC: ASIO and Windows Audio / Mac: UAC2 Class Compliant (no add’l driver needed)
- Power Input Typical: 120VAC / 240VAC / 50Hz / 60Hz Auto-Switching