DISC Dynacord DSP 600 Digital Sound System Processor

Full Description

Multiple Configuration Structures

Users can choose to set the signal processor as 2-way stereo and fullrange, 3-way stereo, 4-way mono and fullrange, 5-way mono and fullrange, 3-way stereo with mono sub and fullrange, 4-way stereo with mono sub and low-frequency and lastly, as a freely assignable 2 x 6 matrix router.

Dual-Core Power

Replacing an entire rack of signal processors, the DSP 600 condenses a premium sound reinforcement system into one unit. Not only is the processor compressed into one device but the DSP 600 provides a variety of advantages over signal processing racks including a 24-bit, 48kHz digital signal path, no patch cables and user-friendly operation and editing.

Finite Impulse Response Filters

With FIR filters on each output of the DSP 600, the sound processor ensures an incredibly linear frequency response, high stop-band attenuation and linear phase system. Users can simply activate the technology by loading the FIR Speaker Setting in the output channel. Signal processing blocks included with the DSP 600 are pilot tone detection, analog or digital inputs, 24-bit, 48kHz A/D converters, 10-band parametric EQs, 31-band graphic EQs, delay and many more.

Included In The Box

• 1 x DSP 600 Processor
• 1 x User Manual
• 1 x Power Cord
• 1 x Connector 6-Pole
• 1 x Warranty Certificate

Features

• 2 x analog inputs, 2 x digital AES/EBU inputs & 6 outputs
• High resolution FIR filters
• Sophisticated speaker protection
• Multi delay level concept
• Configuration & control via Ethernet or USB
• Integrated 2 port Ethernet switch allows daisy chain connection
• Direct access buttons
• 90 presets, 60 factory presets & 30 user-programmable presets
• FLASH memory
• 5 control inputs for recall of presets
• Input/output level metres, limit & clip LEDs
• Output mute buttons, output channel function indicators SUB, LO, MID, HI
• LCD display with backlight
• 6 preconfigured configurations
• Dedicated processing groups
• 512 taps FIR filter for each output
• 48-bit filter algorithms
• Look-ahead peak limiter & thermo limiter
• 24-bit AD/DA converter, 116 dB dynamic range
• Switchable input PAD -6 dB

Specifications

• Mains Voltage: 100 - 240V AC, 50/60Hz
• Power Consumption: 25W
• Analog Audio Inputs: 2 x XLR In, Electronically Balanced, 2 x XLR THRU OUT, Electronically Balanced
• Digital Audio Inputs: 1 x XLR AES/EBU IN, 1 x XLR AES/EBU THRU OUT
• Digital Audio Format: AES3, 32kHz - 192kHz Sample Rate
• Nominal Input Voltage: 1.55 V / +6 dBu
• Maximum Input Voltage (With -6 dB PAD Engaged): 17.3 V / +27 dBu
• Input Impedance: 10kΩ
• Common Mode Rejection: -85 dB @ 1kHz (Typical)
• A/D Conversion: 24-Bit Sigma-Delta
• Analog Audio Outputs: 6 x XLR Out, Electronically Balanced
• Nominal Output Voltage: 1.55 V / +6 dBu
• Maximum Output Voltage: 8.7 V / +21 dBu
• Output Impedance: 50Ω
• D/A Conversion: 24-Bit Sigma-Delta
• Frequency Response: 20Hz - 22kHz
• THD+N: <0.002 Percent
• Dynamic Range: 116 dB
• USB: USB Type B On Front Panel (PC Interface)
• Ethernet: 2 x RJ-45 Ports, 100 MB, Integrated Switch
• Control Port: 1 x 6-Pole Euro Block, Software Configurable For Preset Recall
• Sample Rate: 48kHz
• Data Format: 24-Bit
• Internal Processing: 48-Bit Double Precision
• Signal Processing: Parametric EQs, 31 Band Graphic EQs, Delays, Routing, X-Over, 512 Taps FIR Filters, PA Limiter, Thermal Protection, Level, Polarity, Signal Generator
• Operating Temperature Range: 0°C - 40°C
• Weight: 4.8 kg
• Dimensions
  • Height: 356.1 mm
  • Width: 483 mm
  • Depth: 43.6 mm